Tag Archives: tips

Useful Home Tips: How to Get Your Plumbing System Ready for Winter


If you have lived in the Denver area through at least one cold season, you may be fully aware of the fact that pipes can freeze easily and that this can result in considerable property damage and costly plumbing repair costs when the pipes burst. When the temperature outside plummets below freezing, the water in your pipes can also freeze. When this happens, the water in the pipes can expand, and the pressure on the pipes from the expanding water can cause them to burst. While you cannot prevent all of these types of plumbing issues from happening, you can minimize the likelihood of a winter pipe rupture issue by following a few easy steps.

Wrap Your Exterior Pipes

Plumbers will generally recommend that local homeowners take every step possible to secure their pipes before the first freeze of the year. You cannot easily wrap the pipes that are inside your home’s walls, but there may be exterior pipes that you can access easily.
http://bit.ly/1NFfxyY

Advertisements

HVAC Maintenance: 3 Tips to Get Your Furnace Ready for Winter Weather


Before autumn’s colors fade and the outdoor temperatures plummet, it is important to have HVAC contractors in Denver come out to your home and get your furnace ready for the heating season. A properly maintained furnace is more energy efficient, safer and lasts longer with fewer unexpected breakdowns. These tips can help you to get your home’s heating equipment ready for the upcoming cold weather.

Schedule a Tune-up

Your furnace should be serviced by an HVAC contractor before the cold weather arrives. Doing so when the weather is still mild ensures that your heating equipment will be working properly when you need it to. If any problems are detected during the inspection, your HVAC technician will have enough time to order parts and make the needed repairs to your system.
http://bit.ly/1NKu6x0

Practical Comfort: Tips to Save Money on Heating and Cooling


Denver is known for having very long, cold winters as well as hot summers, and this means that homeowners in the local area use their HVAC system almost year-round. With this in mind, many homeowners are looking for ways to constantly save money on heating and cooling expenses throughout the year. There are a few easy tips that you can follow to reduce energy consumption related to your HVAC system without negatively affecting your comfort level in the home.

Take Advantage of a Programmable Thermostat

If you do not have a programmable thermostat installed, now is the time to do so. A programmable thermostat is designed to reduce your use of the HVAC system without impacting your comfort level by automatically adjusting the temperature settings based on your usual schedule.
http://bit.ly/1WiJACt

Denver Heating and Cooling Tips: Four Red Flags of Furnace Problems


It’s the onset of cold weather in Denver, which means that a few weeks from now, your furnace will soon have to work twice as hard. Without inspection and cleaning, your furnace can wear out faster or stop working entirely. To spare your family from having to sleep through a chilly winter night, pay attention to these signs that your furnace may no longer be at its best shape and call a local heating and cooling specialist to perform repairs as necessary:

1. Your furnace is too old. A regular furnace has an average life expectancy of 16-20 years. If your furnace is nearing this age, have a professional come over to check for any problems that may occur in the coming months. If your furnace is way past this age, you should start shopping for a replacement now. Don’t wait for it to fail at the most inconvenient time.
http://bit.ly/1j2jQIY

Four Tips for Apartment Landlords to Reduce HVAC Costs This Season


It’s now fall in Denver, and winter is just around the corner. Your cooling system is having its much-deserved break, and now the burden’s shifted to heating. With Denver averaging a thick 55 inches of snowfall each year, you have to ensure adequate heating to keep your tenants warm inside. As a landlord, what can you do to keep heating bills as low as possible without sacrificing your tenants’ comfort? Below are four effective tips:

1. Replace your heating system if needed. If you want to cut heating costs, consider replacing those old, worn-out heaters you thought could save you more because they’re cheap. According to a Denver HVAC expert, not only are these old heating systems a carbon monoxide hazard; they are also inefficient, and would therefore increase your gas bills tremendously. Plus, they are at risk of breakdowns.
http://bit.ly/1j2fp0O

Important Plumbing Maintenance Tips That Can Possibly Save Your Home


Plumbing problems are some of the most common issues a household in Denver and anywhere else can face. Not only can they be a source of great inconvenience, they can also cause great damage to your home’s structure if left unchecked. That’s why whenever a plumbing problem occurs, you need to have it taken care of by professional plumbers as soon as possible.
An even better measure than resolving plumbing problems right away is preventing them from happening. As a homeowner you can and need to perform certain maintenance tasks to avoid common plumbing issues. Below are some of the preventive measures you need to do.
http://bit.ly/1OxzMMQ

4 Handy Tips for Businesses to Maximize Returns on HVAC Maintenance


For any business, HVAC maintenance is—or should be—an investment. It’s not enough that you bought the top-of-the-line equipment for your premises. You also have to ensure that it is functioning consistently and optimally for the comfort of your staff and customers or clients. You have to allot a budget for the regular inspection and fine-tuning of your HVAC.
You can bet that maintaining your heating and cooling system will be profitable in many ways. Aside from keeping the ideal temperature of your facilities, investing in HVAC maintenance will also help you avoid wasteful energy expenditures, costly repairs, or even injurious breakdowns in the long haul. Technicians can keep the efficiency of the unit, prevent extensive damages and accidents, and detect any issue that would prompt repairs or even timely parts replacements.
http://bit.ly/1OxwwkN